BigRep Drycon Industrial Filament Dry Cabinet
Industrial Filament Dry Cabinet
Your 3D printer's reliable partner to dry, store, and anneal for maximum part performance.
Active Air Exchange Cycles
The periodic air cycles eliminate moisture by replacing humid air with fresh air, enabling high energy efficiency.
Up to 36 kg Filament Storage
The chambers house up to 16 spools of 1 kg, 8 spools of 4.5 kg, or 4 spools of 8 kg filament.
Siemens control systems
Intuitive user interface thanks to the Siemens LOGO! control systems.
Heats up to 180°C
Both chambers have customizable temperature settings that heat to 180°C, creating uniquely optimal conditions for your high-performance materials.
Dry
For Dual chambers perfect for customized drying settings for different materials.
Store
Locks out the moisture and heat so your material is ready for print when you are.
Anneal
Makes your prints robust, heat resistant and enhances mechanical properties.
Maximize Your Part's Performance
The DRYCON is the only dual-chamber machine on the market that has three things at once - a dryer, storage, and an annealing system. It is engineered to be the perfect partner for your 3D printer, so you can unlock the full potential of your additive manufacturing workflow.
DRYCON delivers quality.
See the difference for yourself.Â
Improve your 3D print's quality, strength, and resistance. Drying, optimal storage, and annealing ensure your parts perform at their best and withstand the test of time.
Why Dry Filaments
Enhances Print Quality
Hygroscopic filaments absorb moisture, resulting in bubbles, holes, and poor layer bonding. Drying it ensures a smooth finish and higher print quality.
Increases Print Success Rate
Moisture in filaments causes inconsistent flow, leading to under- or over-extrusion, stringing, and oozing. You can reduce print defects and failures by drying it.
Keeps Filaments Print Ready
Fully dried and optimally stored filaments save valuable time. Drying eliminates time spent during pre-printing steps so you can start printing right away.
Ensures Dimensional Accuracy
Wet filament expands unevenly during printing, which leads to warping and inaccuracies. By drying it, you maintain the material's original properties and achieve precise results.
Improves Mechanical Strength
Prints made with wet filament are weaker and more prone to cracking. Dry filament provides better layer adhesion and results in stronger, more durable parts.
 Why Anneal 3D Printed Parts
Improves Mechanical Properties
Annealing 3D printed parts involves heating them to a controlled temperature and then slowly cooling them which rearranges the internal structure of the print. This helps release internal stresses that cause warping and distortion, ensuring the part retains its dimensional accuracy. The process also improves inter-layer bonding by fusing the layers more tightly, resulting in greater tensile strength, durability, and functionality.
Enhances Thermal Stability
Increase a part’s resistance to high temperatures by annealing. The process alters the material’s crystalline structure, making it less prone to deformation when exposed to heat. This improves the part's ability to maintain its mechanical properties in fluctuating or extreme temperature environments, ensuring long-term durability and performance in demanding applications.
Your Printer’s Reliable Partner for Industrial Strength Prints.
Two Chambers, Three Functions.
The 2-chamber system delivers optimal performance with three essential functions ensuring high-quality, reliable prints for even the toughest applications.
Dual Chamber Capacity
The DRYCON is equipped with two chambers (780 x 455 x 410 mm each) engineered to dry and store filaments up to 120° C. The bottom chamber doubles as an annealing oven, heating up to 180° C.
Together, the chambers house up to 24 spools of 0.75 kg, 16spools of 4.5 kg, or 8 spools of 8 kg filament with custom temperature control. They can be set to different conditions to treat filaments with their ideal environment requirements. Both chambers operate independently, allowing for multiple functions simultaneously—such as drying or storing filaments in the upper chamber while tempering parts in the lower chamber.
Active Air Exchange Cycles
During the filament drying process, air is periodically exchanged to efficiently remove moisture by replacing humid air with fresh air. This air exchange system ensures consistent drying conditions throughout the process and is more energy efficient than other filament drying methods.
Annealing for Superior Parts
The bottom chamber heats to 180° C, ideal for annealing parts exposed to heat and mechanical stresses.
Annealing significantly improves part accuracy, heat resistance, stiffness, dimensional stability, and other mechanical properties. The process also enhances the aesthetics of the part by giving it a smooth and even finish.
Streamlined DRYCON to 3D Printer Filament System
The DRYCON features four filament outlets that feed the material directly into your 3D printer. This eliminates the need for separate storage or manually transferring the filament to the 3D printer, making it a stream-lined drying, storage, and hassle-free printing process.
3D Printing Materials
Materials that Need Drying to
Achieve Superior Quality Prints
Technical, flexible, high-performance materials deliver high-performance parts with the DRYCON.
PA12 CF - BigRep's fiber-reinforced PA12 provides lightweight durability and strength for advanced technical applications.
PA6/66 - An excellent choice for industrial applications, BigRep PA6/66 is strong, durable, and lightweight with high resistance to heat and chemicals.
TPU 98A - With its flexibility, durability, & abrasion resistance, TPU is commonly used for manufacturing aids, particularly those interfacing with sensitive parts & equipment.
BVOH - BigRep's water-soluble support material, BVOH drastically reduces post-processing for 3D-printed parts, particularly for complex geometries.
ULTEM® 9085 - Often used in aerospace, automotive, and medical applications for its high strength-to-weight ratio, thermal stability, and flame resistance.
PEKK-A - Predominantly used for applications that need exceptional mechanical, thermal, and chemical resistance in aerospace, automotive, and medical industries.
Â
Product Information
Product Information
Shipping & Returns
Shipping & Returns
BigRep Drycon Industrial Filament Dry Cabinet
BigRep Drycon Industrial Filament Dry Cabinet
Industrial Filament Dry Cabinet
Your 3D printer's reliable partner to dry, store, and anneal for maximum part performance.
Active Air Exchange Cycles
The periodic air cycles eliminate moisture by replacing humid air with fresh air, enabling high energy efficiency.
Up to 36 kg Filament Storage
The chambers house up to 16 spools of 1 kg, 8 spools of 4.5 kg, or 4 spools of 8 kg filament.
Siemens control systems
Intuitive user interface thanks to the Siemens LOGO! control systems.
Heats up to 180°C
Both chambers have customizable temperature settings that heat to 180°C, creating uniquely optimal conditions for your high-performance materials.
Dry
For Dual chambers perfect for customized drying settings for different materials.
Store
Locks out the moisture and heat so your material is ready for print when you are.
Anneal
Makes your prints robust, heat resistant and enhances mechanical properties.
Maximize Your Part's Performance
The DRYCON is the only dual-chamber machine on the market that has three things at once - a dryer, storage, and an annealing system. It is engineered to be the perfect partner for your 3D printer, so you can unlock the full potential of your additive manufacturing workflow.
DRYCON delivers quality.
See the difference for yourself.Â
Improve your 3D print's quality, strength, and resistance. Drying, optimal storage, and annealing ensure your parts perform at their best and withstand the test of time.
Why Dry Filaments
Enhances Print Quality
Hygroscopic filaments absorb moisture, resulting in bubbles, holes, and poor layer bonding. Drying it ensures a smooth finish and higher print quality.
Increases Print Success Rate
Moisture in filaments causes inconsistent flow, leading to under- or over-extrusion, stringing, and oozing. You can reduce print defects and failures by drying it.
Keeps Filaments Print Ready
Fully dried and optimally stored filaments save valuable time. Drying eliminates time spent during pre-printing steps so you can start printing right away.
Ensures Dimensional Accuracy
Wet filament expands unevenly during printing, which leads to warping and inaccuracies. By drying it, you maintain the material's original properties and achieve precise results.
Improves Mechanical Strength
Prints made with wet filament are weaker and more prone to cracking. Dry filament provides better layer adhesion and results in stronger, more durable parts.
 Why Anneal 3D Printed Parts
Improves Mechanical Properties
Annealing 3D printed parts involves heating them to a controlled temperature and then slowly cooling them which rearranges the internal structure of the print. This helps release internal stresses that cause warping and distortion, ensuring the part retains its dimensional accuracy. The process also improves inter-layer bonding by fusing the layers more tightly, resulting in greater tensile strength, durability, and functionality.
Enhances Thermal Stability
Increase a part’s resistance to high temperatures by annealing. The process alters the material’s crystalline structure, making it less prone to deformation when exposed to heat. This improves the part's ability to maintain its mechanical properties in fluctuating or extreme temperature environments, ensuring long-term durability and performance in demanding applications.
Your Printer’s Reliable Partner for Industrial Strength Prints.
Two Chambers, Three Functions.
The 2-chamber system delivers optimal performance with three essential functions ensuring high-quality, reliable prints for even the toughest applications.
Dual Chamber Capacity
The DRYCON is equipped with two chambers (780 x 455 x 410 mm each) engineered to dry and store filaments up to 120° C. The bottom chamber doubles as an annealing oven, heating up to 180° C.
Together, the chambers house up to 24 spools of 0.75 kg, 16spools of 4.5 kg, or 8 spools of 8 kg filament with custom temperature control. They can be set to different conditions to treat filaments with their ideal environment requirements. Both chambers operate independently, allowing for multiple functions simultaneously—such as drying or storing filaments in the upper chamber while tempering parts in the lower chamber.
Active Air Exchange Cycles
During the filament drying process, air is periodically exchanged to efficiently remove moisture by replacing humid air with fresh air. This air exchange system ensures consistent drying conditions throughout the process and is more energy efficient than other filament drying methods.
Annealing for Superior Parts
The bottom chamber heats to 180° C, ideal for annealing parts exposed to heat and mechanical stresses.
Annealing significantly improves part accuracy, heat resistance, stiffness, dimensional stability, and other mechanical properties. The process also enhances the aesthetics of the part by giving it a smooth and even finish.
Streamlined DRYCON to 3D Printer Filament System
The DRYCON features four filament outlets that feed the material directly into your 3D printer. This eliminates the need for separate storage or manually transferring the filament to the 3D printer, making it a stream-lined drying, storage, and hassle-free printing process.
3D Printing Materials
Materials that Need Drying to
Achieve Superior Quality Prints
Technical, flexible, high-performance materials deliver high-performance parts with the DRYCON.
PA12 CF - BigRep's fiber-reinforced PA12 provides lightweight durability and strength for advanced technical applications.
PA6/66 - An excellent choice for industrial applications, BigRep PA6/66 is strong, durable, and lightweight with high resistance to heat and chemicals.
TPU 98A - With its flexibility, durability, & abrasion resistance, TPU is commonly used for manufacturing aids, particularly those interfacing with sensitive parts & equipment.
BVOH - BigRep's water-soluble support material, BVOH drastically reduces post-processing for 3D-printed parts, particularly for complex geometries.
ULTEM® 9085 - Often used in aerospace, automotive, and medical applications for its high strength-to-weight ratio, thermal stability, and flame resistance.
PEKK-A - Predominantly used for applications that need exceptional mechanical, thermal, and chemical resistance in aerospace, automotive, and medical industries.
Â
Original: $20,065.97
-65%$20,065.97
$7,023.09Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Industrial Filament Dry Cabinet
Your 3D printer's reliable partner to dry, store, and anneal for maximum part performance.
Active Air Exchange Cycles
The periodic air cycles eliminate moisture by replacing humid air with fresh air, enabling high energy efficiency.
Up to 36 kg Filament Storage
The chambers house up to 16 spools of 1 kg, 8 spools of 4.5 kg, or 4 spools of 8 kg filament.
Siemens control systems
Intuitive user interface thanks to the Siemens LOGO! control systems.
Heats up to 180°C
Both chambers have customizable temperature settings that heat to 180°C, creating uniquely optimal conditions for your high-performance materials.
Dry
For Dual chambers perfect for customized drying settings for different materials.
Store
Locks out the moisture and heat so your material is ready for print when you are.
Anneal
Makes your prints robust, heat resistant and enhances mechanical properties.
Maximize Your Part's Performance
The DRYCON is the only dual-chamber machine on the market that has three things at once - a dryer, storage, and an annealing system. It is engineered to be the perfect partner for your 3D printer, so you can unlock the full potential of your additive manufacturing workflow.
DRYCON delivers quality.
See the difference for yourself.Â
Improve your 3D print's quality, strength, and resistance. Drying, optimal storage, and annealing ensure your parts perform at their best and withstand the test of time.
Why Dry Filaments
Enhances Print Quality
Hygroscopic filaments absorb moisture, resulting in bubbles, holes, and poor layer bonding. Drying it ensures a smooth finish and higher print quality.
Increases Print Success Rate
Moisture in filaments causes inconsistent flow, leading to under- or over-extrusion, stringing, and oozing. You can reduce print defects and failures by drying it.
Keeps Filaments Print Ready
Fully dried and optimally stored filaments save valuable time. Drying eliminates time spent during pre-printing steps so you can start printing right away.
Ensures Dimensional Accuracy
Wet filament expands unevenly during printing, which leads to warping and inaccuracies. By drying it, you maintain the material's original properties and achieve precise results.
Improves Mechanical Strength
Prints made with wet filament are weaker and more prone to cracking. Dry filament provides better layer adhesion and results in stronger, more durable parts.
 Why Anneal 3D Printed Parts
Improves Mechanical Properties
Annealing 3D printed parts involves heating them to a controlled temperature and then slowly cooling them which rearranges the internal structure of the print. This helps release internal stresses that cause warping and distortion, ensuring the part retains its dimensional accuracy. The process also improves inter-layer bonding by fusing the layers more tightly, resulting in greater tensile strength, durability, and functionality.
Enhances Thermal Stability
Increase a part’s resistance to high temperatures by annealing. The process alters the material’s crystalline structure, making it less prone to deformation when exposed to heat. This improves the part's ability to maintain its mechanical properties in fluctuating or extreme temperature environments, ensuring long-term durability and performance in demanding applications.
Your Printer’s Reliable Partner for Industrial Strength Prints.
Two Chambers, Three Functions.
The 2-chamber system delivers optimal performance with three essential functions ensuring high-quality, reliable prints for even the toughest applications.
Dual Chamber Capacity
The DRYCON is equipped with two chambers (780 x 455 x 410 mm each) engineered to dry and store filaments up to 120° C. The bottom chamber doubles as an annealing oven, heating up to 180° C.
Together, the chambers house up to 24 spools of 0.75 kg, 16spools of 4.5 kg, or 8 spools of 8 kg filament with custom temperature control. They can be set to different conditions to treat filaments with their ideal environment requirements. Both chambers operate independently, allowing for multiple functions simultaneously—such as drying or storing filaments in the upper chamber while tempering parts in the lower chamber.
Active Air Exchange Cycles
During the filament drying process, air is periodically exchanged to efficiently remove moisture by replacing humid air with fresh air. This air exchange system ensures consistent drying conditions throughout the process and is more energy efficient than other filament drying methods.
Annealing for Superior Parts
The bottom chamber heats to 180° C, ideal for annealing parts exposed to heat and mechanical stresses.
Annealing significantly improves part accuracy, heat resistance, stiffness, dimensional stability, and other mechanical properties. The process also enhances the aesthetics of the part by giving it a smooth and even finish.
Streamlined DRYCON to 3D Printer Filament System
The DRYCON features four filament outlets that feed the material directly into your 3D printer. This eliminates the need for separate storage or manually transferring the filament to the 3D printer, making it a stream-lined drying, storage, and hassle-free printing process.
3D Printing Materials
Materials that Need Drying to
Achieve Superior Quality Prints
Technical, flexible, high-performance materials deliver high-performance parts with the DRYCON.
PA12 CF - BigRep's fiber-reinforced PA12 provides lightweight durability and strength for advanced technical applications.
PA6/66 - An excellent choice for industrial applications, BigRep PA6/66 is strong, durable, and lightweight with high resistance to heat and chemicals.
TPU 98A - With its flexibility, durability, & abrasion resistance, TPU is commonly used for manufacturing aids, particularly those interfacing with sensitive parts & equipment.
BVOH - BigRep's water-soluble support material, BVOH drastically reduces post-processing for 3D-printed parts, particularly for complex geometries.
ULTEM® 9085 - Often used in aerospace, automotive, and medical applications for its high strength-to-weight ratio, thermal stability, and flame resistance.
PEKK-A - Predominantly used for applications that need exceptional mechanical, thermal, and chemical resistance in aerospace, automotive, and medical industries.
Â
