Magigoo Pro PP (50ml) – Adhesion solution for polypropylene

Magigoo Pro PP is a first‑layer adhesive engineered specifically for polypropylene (PP) and other polyolefin‑type materials that can be difficult to bond to a build plate. It helps provide a strong adhesion platform during printing and supports easier removal once conditions are right.

Key benefits

• Specifically designed for polypropylene printing.
• Helps reduce warping and lifting common with PP parts.
• Water‑based formulation intended to be safer and cleaner than many alternatives.

How to use

1. Apply on a clean build surface (ideally on a cool bed).
2. Shake the bottle, then press the applicator tip against the bed to start the flow (avoid squeezing hard).
3. Spread an even, thin coat over the active print area—make sure no spots are missed.
4. Start your print. Most Magigoo products grip when the bed is hot and release as the bed cools.

Print tips

• Use filament manufacturer bed/nozzle recommendations and tune first-layer settings for your PP brand.
• For challenging parts, use a brim and ensure excellent first-layer squish without over-compression.

Cleanup

Magigoo Pro PP may benefit from a short soak before wiping off. Use water and a cloth.

Safety & handling

• Refer to the Safety Data Sheet before use.
• Avoid contact with eyes; washing hands after use is recommended and gloves are advised.

What’s included

• 1 × Magigoo Pro PP pen bottle